This document defines the APIs specifications for various operations that ABIS can perform to integrate with MOSIP.
API specification version: 0.9
Published Date: February 05, 2021
Revision Note
Publish Date
Revision
May 07, 2020
This is the first formal publication of the interface as a version-ed specification. Earlier draft are superseded by this document. The interface is revamped to make it friendlier to programmers and also has a new method for conversion.
June 09, 2020
A note related to targetFPIR was added
June 26, 2020
August 04, 2020
November 19, 2020
Note on encryption of biometric data share using referenceURL has been added.
February 05, 2021
March 23, 2021
May 3, 2021
The logic for encryption has been updated for ABIS data share URL
September 8, 2021
All possible error codes for Data Share URL has been added.
Introduction
An ABIS system that integrates with MOSIP should support the following operations.
All ABIS operations are via. a message queue and are asynchronous. The data sent in ABIS can be byte array or text based on a configure in registration processor.
Parameters
Common Parameters
Common parameters used for all ABIS operations:
Name
Description
Restrictions
Type
requestID
ID that is associated with each request sent to ABIS
ABIS should not use this ID in any other context outside the request
UUID
referenceID
ID of a single registration record. Registration record is maintained in MOSIP. This ID is the mapping between MOSIP and ABIS
None
UUID
referenceURL
URL to the biometrics data stored in MOSIP. This URL will have read only access
None
HTTPS URL
biometricType
Type of biometric data sent in the request
FMR/FIR/IIR
String
returnValue
Code for response
String
failureReason
Code for failure reason
String
Standard Return Codes
Code
Status
1
Success
2
Failed
Failure Reasons
Code
Reason
1
internal error - Unknown
2
aborted
3
unexpected error
4
unable to serve the request - invalid request structure
5
missing referenceId (in request body)
6
missing requestId (in request body)
7
unable to fetch biometric details (using referenceURL)
ABIS must get biometric data from referenceURL, process it and store it locally within the ABIS reference database. More details about the refernceURL is mentioned in our referenceURL section.
referenceId must not be active prior to this operation i.e., it must not have been used before this operation.
De-duplication must not be performed in this operation.
MOSIP will provide biometric data in CBEFF format to ABIS as a response of referenceURL and the data will be encrypted and encoded as mentioned below.
The reference URL is MOSIP's datashare URL which is generated based on a policy defined by MOISP's adopter.
The referenceURL is authenticated and authorized; ABIS needs to send a JWT token inside the request header COOKIE
The referenceURL will be active for a certain time as decided by the MOSIP adopter
The data sent in the referenceURL will be encrypted
Authentication Token
As mentioned above in order to access the request URL the ABIS system needs to send a JWT token inside the request header COOKIE. In order to get the token ABIS needs to call MOSIP's AuthN & AuthZ API with Client ID & Secret Key by passing the credentials (clientid, secretkey and appid) which would be provided by the System Integrator (SI).
Below is the sample API details for getting the authentication token. More details about the API is available in our AuthN & AuthZ document.
Sample Request URL
POST https://{base_url}/v1/authmanager/authenticate/clientidsecretkey
The P12 file for the above encrypted CBEFF file is available here: cbeff.p12.
The other details for the p12 file are:
certificate.keystore=PKCS12
certificate.alias=cbeff
certificate.password=password
The structure of the encrypted data downloaded from referenceURL in MOSIP 1.1.5.5 or prior versions
The data downloaded would be base64 encoded. Hence, after decoding the data will be in the below format. It will be divided in two Parts after splitting using #KEY_SPLITTER#.
Encrypted Key Data
KEY_SPLITTER
Encrypted Actual Data
Block 1
#KEY_SPLITTER#
Block 2
Block 1:
Block 1, i.e. the encrypted key data is again split into two parts,
The first part is the Certificate Thumbprint i.e. the key identifier which is the first 32 bytes in Block 1.
The second part is the Encrypted Random AES Key which is encrypted with RSA OAEP - SHA256-MFG1. This cosistutes the remaining 256 bytes of Block 1.
Block 2:
Block 2, i.e. the encrypted actual data is again split into two parts,
The 1st part is the Encrypted data, encrypted using AES GCM PKCS5Padding.
The 2nd part is IV/Nonce i.e. the last 32 bytes appended after encrypted data.
The structure of the encrypted data downloaded from referenceURL in MOSIP 1.2.0 or later versions
The data downloaded would be URL safe base64 encoded. Hence, after decoding the data will be in the below format. It will be divided in two Parts after splitting using #KEY_SPLITTER#.
Encrypted Key Data
KEY_SPLITTER
Encrypted Actual Data
Block 1
#KEY_SPLITTER#
Block 2
Block 1:
Block 1, i.e. the encrypted key data is again split into three parts,
The 1st part is VER_BYTES (version bytes). The Current version constant is set as VER_R2 and this is present in the first 6 bytes of Block 1.
The 2nd part is the Certificate Thumbprint i.e. the key identifier which is present in the next 32 bytes after VER_BYTES.
The 3rd part is the Encrypted Random AES Key, encrypted with the RSA OAEP - SHA256-MFG1. This cosistutes the remaining 256 bytes of Block 1.
Block 2:
Block 2, i.e. the encrypted actual data is again split into two parts,
The 1st part is the random 32 bytes which will be used as AAD in AES encryption(first 32 bytes). From this 32 bytes AAD data, the first 12 bytes is IV/Nonce.
The 2nd part is the encrypted data which is encrypted using AES GCM PKCS5Padding.
All Possible Error codes and Messages from Datashare URL
Error Code
Error Message
DAT-SER-003
File does not exists or File is empty
DAT-SER-006
Data share not found
DAT-SER-006
Data share usage expired
KER-ATH-401
Authentication Failed
KER-ATH-403
Forbidden
Please note that, for all the functional failures MOSIP sends response code as 200.
Identify
All Insert requests added to the queue earlier must be serviced by ABIS when performing an Identify request.
Identify request provides a 1:N comparison. The given input is compared either against the gallery passed or if the gallery is not specified the entire database.
The input for comparison can be provided by referenceID or referenceURL.
If the referenceID is given it is used as the preferred option. The given referenceID must be existing in the ABIS database else ABIS will throw and error.
If the referenceID is omitted or NULL and the referenceURL is passed the ABIS retrieves the biometrics provided in the referenceURL and compares the same against either a gallery or its database.
If in case, both referenceID and referenceURL are missing ABIS throws an error.
We are not using the referenceURL in Identify request for our current implementation. Hence, it will be an empty string for Identify request. MOSIP adopters can have customized work-flows where the referenceURL can be used.
Identify request should give all candidates which are considered as a match based on ABIS thresholds.
This request should not match against referenceID that is not in the reference database.
The response now has a section for analytics that contains key value pairs. Values can be JSON objects also. The contents of the analytics section will be agreed upon by the MOSIP adopter with the ABIS provider. Scores are also moved to this section and are not mandatory response parameters any more.
Ordering or ranking of results is not explicitly specified and can be agreed upon between the MOSIP adopter and the ABIS provider.
The flags section of the request can be used to customize or control ABIS behavior by sending specific key value pairs.
"targetFPIR" or "maxResults" are examples of such flags that can alter the ABIS behavior. These are optional attributes for MOSIP during an identify request. MOSIP expects the adopters to define these parameters based on the accuracy expectations and the work-flow requirements. These can be set at the ABIS configuration level and need not be part of the individual request at all.
To give an example, please find the following calculation for targetFPIR - which is the error rate at which identification requests are expected to return non-empty candidate list.
{
"id": "mosip.abis.identify",
"version": "1.1",
"requestId": "01234567-89AB-CDEF-0123-456789ABCDEF",
"requesttime": "2020-03-29T07:01:24.692Z",
"referenceId": "987654321-89AB-CDEF-0123-456789ABCDEF",
"referenceURL": "",//will be an empty string, if not used
"flags": { //optional
//maxResults is an example and not a prescribed flag
"maxResults": "10",
//targetFPIR is an example and not a prescribed flag
"targetFPIR": "30",
//there can be more following this
"flag1": "value1",
"flag2": "value2"
},
"gallery": {
"referenceIds": [
{
"referenceId": "2abe7b7d-b58a-4466-a006-c79297281123"
},
{
"referenceId": "7acce7b7d-b58a-4466-a006-c79297281456"
},
{
"referenceId": "3bce7b7d-b58a-4466-a006-c79297281678"
},
{
"referenceId": "5cce7b7d-b58a-4466-a006-c79297281098"
},
{
"referenceId": "2cce7b7d-b58a-4466-a006-c79297281321"
}
]
}
}
Success Response
{
"id": "mosip.abis.identify",
"requestId": "01234567-89AB-CDEF-0123-456789ABCDEF",
"responsetime": "2020-03-29T07:01:24.692Z",
"returnValue": "1",
"candidateList": {
"count": "1",
"candidates": [
{
"referenceId": "7acce7b7d-b58a-4466-a006-c79297281456",
"analytics": {
//internalScore is an example and not prescribed
"internalScore": "112",
//confidence is an example and not prescribed
"confidence": "90",
//there can be more following this
"key1": "value1",
"key2": "value2"
},
// modality wise analytics
"modalities": [
{
"biometricType": "FIR",
"analytics": {
"confidence": "90",
"internalScore": "112",
"key1": "value1",
"key2": "value2"
}
},
{
"biometricType": "IIR",
"analytics": {
"confidence": "90",
"internalScore": "112",
"key1": "value1",
"key2": "value2"
}
},
{
"biometricType": "FID",
"analytics": {
"confidence": "90",
"internalScore": "112",
"key1": "value1",
"key2": "value2"
}
}
]
}
]
"analytics": {
//This is a optional section
//Data in this section can be agreed upon between the MOSIP adopter and the ABIS Provider
}
}
}